Reaktorit ja jäähdyttimet
Xelsius - reaktorikeskus
A compact and fast reactor with 10 completely individually tempered and stirred reactor cells in the temperature range from -20°C to +150°C. This system is suitable for parallel synthesis, flow chemistry, reaction and process optimization as well as for performing DoE (Design of Experiment) studies. Save valuable space in the fume hood with a flexible and innovative solution. With XELSIUS you save time, increasing your laboratory throughput.
10 different reaction profiles. Simultaneously.
10 in 1… and much more!
Ten experiments in a single unit precisely, with completely and independently heating, cooling and stirring. Ideal for relieable results in solubility determination, catalyst supported reactions, DoE, crystallization experiments and PCR reactions.
Advanced software made simple
By using the software in LAB mode, simply set the temperature, stirrer and desired time or ramp and start immediately. With intuitive and clearly arranged features, you can start working productively with the Xelsius after just a few clicks.
Accessories that matter
Different configurations and accessories are available to satisfy your laboratory requirements.
Accessories that matter
XELSIUS Reflux Condenser
Key Features
- Wide temperature range -20°C to +150°C
- Ergonomic and small footprint
- Independent control of all parameters for each cell
- Temperature stability and accuracy of 0,1°C
- Different stirring rate in each vial
- Overheat Protection for safety operation
- PTFE coated surface resistant to aggressive acids/solvents
- Gloves sensitive touch screen
- Long lifetime reaction cell
- Very intuitive and user-friendly Interface
- Live monitoring of flow and temperature on graphical display
- Flexibility of operation under fume hood or outside on bench-top surface
Applications
- Reaction Optimization
- Drug Discovery
- Parallel Synthesis
- Route Scouting
- Gravimetrical Analysis
- Flow Chemistry
- Experiment Studies (DoE)
- Automated Filtration
Nestejäähdyttimet
The LabTech water chiller line is specially designed for analytical, medical and industrial use providing accurate control of the temperature. By adapting new technologies and innovations to maintain top reliability level worldwide, all production steps are focused to offer high quality and customized solutions to meet any requirement. The LabTech water chiller line ranges from 240W to 9000W.
Best by design, performance and reliability
Even if water is one of the most precious and scarce resources, it is still largely used as coolant in many laboratories. Most of the water used as coolant unfortunately is not recycled, causing higher and higher laboratory costs and wasting a precious natural resource. LabTech offers a complete line of recirculating water chillers to virtually match all laboratory needs with 10 models featuring temperatures from -20 to 35°C and cooling capacities from 500W to 9000W. LabTech’s state-of-the-art water chillers ensure accurate and constant cooling conditions of instruments even in the harsh laboratory environments while reducing the carbon footprint. When designing the most recent
series LabTech’s R&D team, among other crucial parameters, focused its attention on the noise, already low and very much appreciated by countless of users worldwide, and the result is a further reduced level. Thanks to the excellent price/performance ratio, robustness, reliability, quietness and simplicity to use there are more than 35.000 LabTech water chillers installed worldwide positioning our brand among the most important players of the industry. In addition to standard models numerous customized versions are available.
High energy efficiency
The “hot gas bypass” technology carries back the hot. uncondensed refrigerant through a reservoir coil eliminating both the ON/OFF compressor cycle and energy-waste.
Accurate temperature
P.I.D. is a dynamic temperature control technique through proportional. integral derivative algorithms controls that guarantees precise and stable temperature setpoint.
High quality components
All parts used in LabTech’s chillers have to pass strict quality control tests: the quality control ensures a long lifespan even with 24/7 use.
High energy efficiency
The “hot gas bypass”
technology carries back the
hot. uncondensed refrigerant
through a reservoir coil
eliminating both the ON/OFF
compressor cycle and
energy-waste.
Operating cost reduction
The LabTech’s recirculating
chillers allow to save a
large amount of tap water.
significantly reducing lab
costs.
Accurate temperature
P.I.D. is a dynamic
temperature control
technique through
proportional. Integral
derivative algorithms controls
that guarantees precise and
stable temperature setpoint.
“Green lab conditions”
All LabTech chillers use
CFC-free cryogenic gas
which is compatible with
international environmental
standards.
High quality components
All parts used in LabTech
chillers have to pass strict
quality control tests. The
quality control ensures a long
lifespan. even with 24/7 use.
High performance
The LabTech’s chillers
guarantee quiet operations
and low water consumption
providing rapid and powerful
cooling.
Applications
- AS-GF
- ICP-OES
- ICP-MS
- XRF
- XRD
- Rotary evaporation
- Laser
- Distillation
- Packaging
- Sputtering
- Industry
- Electron microscopy
